Toolroom in Stubal — since 2008
Precision, reliability and progress in every cut.
From 3D model to finished tool under our own roof: milling up to five axes, sinker and wire EDM, grinding and final assembly — all fully guaranteed.
Machine parts and assemblies
From drawing to finished assembly, nothing subcontracted.
Milling, turning, EDM and grinding of machine parts — one-off or in batches, with final assembly and dimensional inspection before despatch.
Our own toolroom
The whole tool is made under one roof.
Our own machine park in Stubal: milling up to five axes, sinker and wire EDM, turning and grinding — through to assembly and tool trials.
Who we are
A family toolroom with 18 years of continuous production
M-TOOLS D.O.O. was founded in January 2008 in Stubal near Kraljevo, Serbia, as a small family firm. We started with tool finishing — polishing, assembly and commissioning — the work that demands patience and an eye for detail, and that taught us how a tool actually behaves once it finally goes into production.
Step by step, importing modern CNC metalworking machines from the United Kingdom and Germany, we built up our own capacity. Today we can meet the most demanding customer requirements — from design and programming, through roughing and finishing, to assembly, trial runs and a guarantee on the finished tool.
Parts produced in our tools are fitted to premium cars from German and Japanese manufacturers. Besides our domestic market in Serbia, we supply customers in Germany, the USA, Croatia, Bosnia and Herzegovina, Montenegro and Albania.
Today the same shop builds injection moulds, stamping dies and automatic PET blow moulding machines, all backed by CNC machining up to five axes.
What we do
CNC machining and tooling, built in-house in Serbia
We build the complete tool in-house — from design and machining through assembly, trials and delivery with our own transport.
-
01Injection moulds
Moulds for plastics, rubber and aluminium injection, including PET preform tooling. Cavities are sunk by sinker and wire EDM in house, followed by assembly and trial runs.
-
02Stamping and blanking dies
Dies for blanking and piercing sheet metal — blanking, bending and progressive. Hardened components are finished by EDM and grinding for long life and a clean cut.
-
03Thermoforming tooling
Tooling for thermoformed packaging and parts, with vacuum and cooling channels. Upper and lower tool halves, cutting knives and location plates.
-
04PE blow moulding tools
Tooling for blow-moulded polyethylene packaging. Cavities, cooling circuits and pinch-off, built around the container and the machine you already run.
-
05PET blow moulding machines
Our own product: fully automatic, servo-driven blow moulders for PET containers. One to eight cavities, for volumes from 0.2 to 10 litres (0.05–2.6 US gal).
-
06Machine parts
Machine parts made and repaired to your drawing or sample — one-off or in batches, through milling, turning, EDM and grinding to final assembly.
Made in our own shop
A tool has to run from the first batch. That is why we build it and prove it under one roof.
Request a quoteWhy M-TOOLS
Four reasons our customers come back
-
01
Modern equipment
Three-, four- and five-axis CNC milling machines, sinker and wire EDM, lathes, precision grinding and cutting — all under one roof, with no reliance on subcontractors.
-
02
Experience and expertise
A team focused on detail that approaches every project professionally, from the first design consultation to putting the tool into production.
-
03
Flexibility and custom solutions
We handle both small orders and complex series. We match the tool to the machine, material and cycle the customer actually runs, not to a theoretical case.
-
04
Quality and precision
Every product passes rigorous inspection before dispatch, so it meets the highest standards and runs reliably from day one.
Machine park
11 CNC milling machines and complete EDM in-house
We cover the whole process ourselves, from roughing to final EDM and grinding: 11 CNC milling machines — three-, four- and five-axis. The largest, a large-format machine, has axis travels of X 2,500 × Y 1,000 × Z 1,000 mm (98.4 × 39.4 × 39.4 in). Below is an overview; the full list is on the Capabilities page.
| Machine | Note |
|---|---|
| 11 × CNC milling machines — three-, four- and five-axis | Roughing and finishing of plates and cavities, fourth-axis indexing and simultaneous five-axis machining of complex forms, up to 5 axes |
| Large-format CNC milling machine | One of the 11 mills · Axis travels X 2,500 × Y 1,000 × Z 1,000 mm (98.4 × 39.4 × 39.4 in) |
| 1 × CNC sinker EDM | Die-sinking — cavities, ribs and sharp internal corners |
| 1 × CNC wire EDM | Hardened stamping die components |
| 1 × Surface grinding machine | Finishing of mating faces |
| 1 × Universal lathe | Turned parts and modifications |
| 1 × Programmable lathe | Series production of turned parts |
| 1 × Tool sharpener | Cutting-tool maintenance |
| 1 × Circular metal cutting saw | Stock preparation and cut-to-length |
Our own product
Fully automatic PET blow moulding machines
For a long time we produced semi-automatic PET blow moulding machines. Five years ago we moved to fully automatic, servo-driven machines with a considerably shorter cycle and a more stable process. More than ten have been built and commissioned to date.
We configure each machine around the container the customer actually makes — from one to eight cavities and for volumes from 0.2 to 10 litres (0.05–2.6 US gal). The mould is supplied with the machine, we commission it on site and train the operators.
Key specifications
- Cavities1–8
- Container volume0.2–10 L (0.05–2.6 US gal)
- DriveFull servo
- Machines delivered10+
From our shop floor
Tools, machines and parts as they actually leave the shop
Photographs from our toolroom in Stubal: the machines we work on, the tools and moulds we have built, and parts from our own production.
Industries
Where our tooling is used
Automotive
Tooling for parts fitted to vehicles from German and Japanese manufacturers — from functional plastic components to sheet-metal parts.
Packaging
Injection moulds for PET preforms, thermoforming tooling and complete automatic blow moulding machines for PET containers of 0.2–10 L (0.05–2.6 US gal).
General engineering
Machine parts, modifications, refurbishment of existing tooling and one-off parts made to drawing or from a sample.
FAQ
What customers ask us most
Which file formats do you accept?
We work with STEP and IGES 3D models, and with DWG, DXF and PDF drawings. If you only have a sample or an old tool, bring it in — we will capture the geometry and propose a solution.
Do you make one-offs, or only series?
Both. We build prototypes and single tools as well as more complex series. Flexibility is why customers come back, so no order is too small for us to look at.
How long does a tool take to build?
Lead time depends on tool complexity, the number of cavities and current machine loading, so we do not quote a blanket figure up front. Send your drawing through the quote form and you will get a firm date together with the price.
Do you service tooling you did not build?
Yes. We carry out complete refurbishment regardless of who built the tool, as well as service after another manufacturer's warranty has expired, with fast fault diagnosis.
Do you deliver the finished tool?
Yes, we deliver with our own transport. We also have customers across the region — in Croatia, Bosnia and Herzegovina and Montenegro — and for deliveries outside Serbia we agree terms case by case, depending on the market and the value of the consignment.
Next step
Send a drawing and get a firm quotation
Attach STEP, IGES, DWG, DXF or PDF documentation and we will come back with a price and a lead time. If a call is easier, phone us — we work in both Serbian and English.